Realme C51s RMX3765 Flash File Firmware

Realme C51s RMX3765 Firmware

The Realme C51s RMX3765 Firmware Flash File can be used to fix logo hag, restart Problems, pin pattern unlock, FRP bypass, black and white display after Flash wrong file, dead recovery, and other Software Problems.

if you are facing any Software Problems on Realme C51s and want to Download the official Stock Firmware of Realme RMX3765, Then you have come to the right website. Here is the latest and tested Flash File for your Realme phone. For Checking Your Firmware Version dial *#899# in the emergency option.

Advantage of Stock Firmware:

  • you can unbrick Realme c51s using Flash File
  • Fix the boot loop Problem on your device
  • Remove and Bypass the FRP Lock
  • Repair Ime and baseband version
  • Unlock Pin, Pattern Lock
  • Fix Restart and logo hag Problems

Download Realme C51s RMX3765 Stock Firmware:

Requirement:

  • Firmware Supported only Relame RMX3765 Device
  • Make sure your Battery is more than 50% charged.
  • Need a PC or laptop
  • Download the latest Flash tool and USB Driver

How to install Realme C51s RMX3765 Flash File:

  • Download latest version Oplus download tool and stock firmware.
  • Once downloaded extract the firmware and tool.
  • Download and Install the latest oppo mtk qcom USB driver on your computer.
  • open the tool folder and Run Download-tool.exe on your computer.
  • Now Log in Oplus tool using your Oppo ID credentials to proceed with firmware installation
  • Make sure to select the correct file for your device
  • Connect your device to the computer using the following pattern: Volume Up + Volume Down + USB cable. If your device is not recognized, then connect with the test point.
  • Be patient and wait until you receive a success confirmation soon.
  • Once the installation is completed, disconnect your device from the computer.
  • it will start automatically.

How to Install Recovery ROM

  • you can sideload Via stock recovery or local update
  • adb sideload ‘filename’

Flashing Recovery ROM via Fastboot:

  • extract update rom (payload.bin) using payload dumper go
  • use fastboot flash in this format
  • fastboot flash ‘partition name’ ‘filename

Note: always use the Latest stock firmware and flash tool to avoid any flashing error.

LEAVE A REPLY

Please enter your comment!
Please enter your name here